Table des Matières
Publicité
Compliance Model Number:
Product Family Name:
EMC
USA—FCC Class B
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference that may cause undesired operation.
European Union
This equipment complies with the following requirements of the EMC Directive 89/336/EEC:
As Telecommunication Network Equipment (TNE) in both Telecom Centers and Other Than Telecom Centers per
(as applicable): EN300-386 V.1.3.2 (2003-05) Required Limits:
EN55022:1994 +A1:1995
+A2:1997
EN61000-3-2:2000
EN61000-3-3:1995
+A1:2000
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
As information Technology Equipment (ITE) Class B per (as applicable):
EN55022:1994 +A1:1995 +A2:1997 Class B
EN61000-3-2:2000
EN61000-3-3:1995 +A1:2000
EN 55024:1998 +A1:2001 +A2:2003 Required Limits
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
Declaration of Conformity
R500
XVR-2500 Graphics Accelerator (X7295A)
Class B
Pass
Pass
6 kV (Direct), 8 kV (Air)
3 V/m 80-1000MHz, 10 V/m 800-960 MHz and 1400-2000 MHz
1 kV AC and DC Power Lines, 0.5 kV Signal Lines
2 kV AC Line-Gnd, 1 kV AC Line-Line and Outdoor Signal Lines, 0.5 kV Indoor Signal Lines > 10m
3 V
Pass
Pass
Pass
4 kV (Direct), 8 kV (Air)
3 V/m
1 kV AC and DC Power Lines, 0.5 kV Signal and DC Power Lines
1 kV AC Line-Line and Outdoor Signal Lines, 2 kV AC Line-Gnd, 0.5 kV DC Power Lines
3 V
1 A/m
Pass
Declaration of Conformity
vii
Publicité
Table des Matières
