Publicité
Les langues disponibles
Les langues disponibles
IV. Operating Instructions
- Kettle grill
- Grill surface approx. (diameter) 47 cm
- Gross weight: 4.25kgs
- Enameled
- With wheels & shelf
Use outdoors only. Please read the instructions before use.
On the next pages you will find instructions for the proper assembly of your grill. It is recommended that you first lay all the accessories side by side and check
that all the parts are present. It is important that you do not tighten the screws at first. It is best to do this after the entire grill has been assembled.
V. Warnings
- Do not use the grill indoors.
- Keep children away from the grill.
- Do not leave the grill unattended.
- Do not move the grill after it has been lit.
- Do not use alcohol or gasoline to light the grill.
- Do not put too many coals in the charcoal container of the grill.
- Do not use water when the grill is still hot. This could cause damage to the enamel layer.
- Close all ventilation ducts when extinguishing the coals.
- Read these instructions carefully first.
- Make sure that the grill has been assembled according to the instructions.
- Use heat-resistant gloves.
- Make sure that no children or elderly people are near the hot grill.
- Keep a fire extinguisher handy.
VI. Parts list
Number
Description
1
Lid
2
Air vent
3
Handle (Lid)
4
Handle (Fire bowl)
5
Fire bowl
6
Cooking grate
7
Leg cup
8
Long leg
9
Wheel leg
10
Rectangular grid
VIΙ. Assembly (see page 2)
Step 1
- Install the lid handle (3) and lid hanger hook (15) to the grill lid (1) using screw (D), washer (F) and nut (J).
- Place the air vent onto the lid with screws (A) and nuts (E).
Step 2
- Install the fire bowl handles (4) to the fire bowl (5) using screw (C) and washer (F).
Step 3
- Insert the leg cup (7) on the wheel legs (9) and long legs (8) and install them to the fire bowl (5) with screw (B) and washer (F) as shown in the picture in
page 2.
- Make sure that the 2 long legs are mounted on the same side as one of the bowl handles and that the other 2 wheel legs are placed on the other side
with the other handle.
Step 4
- Making sure that the bent tips of the rectangular grid (10) are pointing in the opposite direction of the grill bowl (5), insert them first into the holes of
the long legs (8) and then into the holes of the wheel legs (9).
- Insert plastic washer (H), wheels (12), washer (G) and secure with lock nut (I) on both sides.
- Tighten all screws.
Step 5
- Mount the ash door (11) onto the fire bowl (5) with screws (A) and nuts (E).
- Install the ash tray (13) by aligning the slots with the legs (8+9) and rotating the ash tray to lock it in place.
- The BBQ grill is now ready for use.
Quantity
Number
Description
1
11
Ash door
1
12
1
13
Ash tray
2
14
Charcoal grate
1
15
Hanger hook (lid)
1
4
2
2
1
WWW.NIKOLAOUTOOLS.GR
Quantity
1
Wheel
2
1
1
1
Letter
Description
A
Screw M4*8mm
B
Screw M6*30mm
C
Screw M6*16mm
D
Screw M5*20mm
E
Nut M4
F
Washer D6
G
Washer D8
H
Plastic washer
I
Lock nut
J
Nut
Quantity
2
4
4
2
2
10
2
2
2
2
5
Publicité
