Kolpin 2100 Instructions D'installation

Please read and understand these instructions completely before installation to avoid injury to yourself, damage to the vehicle or accessory.
Be certain to follow all specifications. For proper installation, two people are required
Dealer: These instructions contain important information for future reference and must be given to the customer at time of purchase or
upon completion of installation. Torque specifications must be followed when tightening bolts.
ITEM PART NAME
A Front windshield
B Rear windshield
C Roof
D Edge guard strip
Instruction
bag
E Hardware
Note that a few components of the vehicle are not depicted on the drawings to make the installation instructions
1. Installation
a) To apply the edge guard (Item D) to the front windshield (Item A), find a clean flat
area where you can lay down the windshield. Partially remove the protective film
needed on both sides and apply the edge guard using manual pressure to ensure good
adhesion to the windshield.
b) Install all clamps (Item E) to the roll cage of your vehicle without any other hardware. Next drawing shows the proper position and
direction of all 17 clamps.
8
2
1
2100 - Installation instructions for Youth Polaris RZR 170 shields & roof package – Rev00
INSTALLATION INSTRUCTIONS
YOUTH POLARIS RANGER RZR 170
SHIELDS & ROOF PACKAGE
PART # 2100
Parts List
CNC windshield cut-out made of 1/8" thick GE FMR polycarbonate with structural bend
CNC windshield cut-out made of 1/8" thick GE FMR polycarbonate with structural bends
CNC roof cut-out made of 1/8'' thick high dense polyethylene with structural bend
Includes : 32" edge guard strip for 1/8" wall thickness [end user to cut to exact length]
Includes : 17 nylon clamps 1 ¼", 17 button head screws M5 x 16, 34 washers M5 and 17 locknuts M5
as clear as possible.
9
3 4
7
DESCRIPTION
Edge guard strip
10
13
15
12
5
6
11
14
16
17
WWW.KOLPIN.COM
QTY
1
1
1
1
1
1