Kolpin POLARIS RZR 900 Instructions D'installation

READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLATION TO
AVOID INJURY TO YOURSELF, DAMAGE TO THE VEHICLE OR ACCESSORY.
Torque specifications must be followed when tightening bolts. Over-tightening any and/or all screws will cause
As specified on carton label, once protective film on shields is removed, product cannot be returned.
As specified on carton label, damage caused by packaging staples is not covered by warranty. All staples must be
Failure to follow these installation instructions completely may void any warrantable components and result in
Do not use Loctite or any other similar fastener adhesive. These types of products react to plastics and cause
Our windshields are made from the highest quality material providing optimum transparency and clarity.
Blurriness and/or extrusion marks may or may not appear when looking through windshield from a wide, side-
The application of improper cleaners, abrasive and/or dirty cleaning towels can severely damage the product.
Failure to follow cleaning recommendation (provided herewith) may void any warrantable components.
These instructions contain important information for future reference and must be given to the customer at time of
ITEM
A
B
C
INSTRUCTION
BAG
D
1. Installation
a) Install mounting hardware (Item D) to the roll cage as shown below and tighten.
2751 - Instructions POLARIS RZR 900 Rear Windshield - rev00
IMPORTANT NOTICES
For proper installation, TWO people are required .
cracks around mounting holes which is not covered by any warranty.
removed prior to removing product from carton.
product damage or personal injury.
cracking. Not covered by any warranty.
angle. This is normal for all extruded clear plastic materials.
purchase or upon completion of installation.
Parts List
(parts available with kit only and not available separately)
PART NAME
Upper rear windshield
Lower rear windshield
Foam cushion
Includes : 8 philips truss screws M6 x 24, 2 philips truss screws M6 x 20, 2 flanged locknuts
Mounting hardware
Philips truss
screw M6 x 24
Coupling
INSTALLATION INSTRUCTIONS
POLARIS RZR 900
REAR WINDSHIELD
DEALER
CNC windshield cut-out made of ⅛" thick GE polycarbonate or equivalent
CNC windshield cut-out made of ⅛" thick GE polycarbonate or equivalent
Included : 48" of 1" x ⅛" self adhesive foam cushion [end user to cut to exact length]
M6, 4 coupling nut M6, 6 plastic shoulder washers M6 and 8 round spacers ½"
nut M6
Round
spacer ½"
PART # 2751
DESCRIPTION
www.kolpin.com
QTY
1
1
1
1