Kolpin 2900A Instructions D'installation

READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLATION TO AVOID INJURY TO YOURSELF,
AS SPECIFIED ON CARTON LABEL, ONCE PROTECTIVE FILM ON SHIELDS IS REMOVED, PRODUCT CANNOT BE RETURNED.
AS SPECIFIED ON CARTON LABEL, DAMAGE CAUSE BY PACKAGING STAPLES IS NOT COVERED BY WARRANTY. ALL STAPLES MUST BE
FAILURE TO FOLLOW THESE INSTALLATION INSTRUCTIONS COMPLETELY MAY VOID ANY WARRANTABLE COMPONENTS AND RESULT IN
These instructions contain important information for future reference and must be given to the customer at time of purchase or
ITEM PART NAME
A Upper windshield
B Lower windshield
C Edge guard strip
D
INSTRUCTION
E Round clamps (1 ¾" diam.)
BAG
F Hardware
1. Installation
a) To apply the edge guard (Item C) to the lower windshields (Item B), find a
clean flat area where you can lay the windshields. With extreme caution,
partially remove the protective film and apply the edge guard using manual
pressure to ensure good adhesion to the windshields.
b) Assemble all hinges (Item D) to lower and upper windshield (Item A & B) as per drawings.
2900A - Instructions JOHN DEERE XUV620i/850D/HPX Full Windshield With Access - revision 00
JOHN DEERE XUV620i/850D/HPX FULL WINDSHIELD
IMPORTANT NOTICES
DAMAGE TO THE VEHICLE OR ACCESSORY.
FOR PROPER INSTALLATION, TWO PEOPLE ARE REQUIRED.
TORQUE SPECIFICATIONS MUST BE FOLLOWED WHEN TIGHTENING BOLTS.
REMOVED PRIOR TO REMOVING PRODUCT FROM CARTON.
PRODUCT DAMAGE OR PERSONAL INJURY.
upon completion of installation.
Parts List
(parts available with kit only and not available separately)
Hinges Includes : 5 hinges, 20 button head screws M6 x 18, 20 plastic shoulder washers M6 and 20 locknuts M6
INSTALLATION INSTRUCTIONS
(WITH FOLDING UNDER HOOD STORAGE ACCESS)
PART # 2900A
DEALER
DESCRIPTION
CNC windshield cut-out made of ¼" thick GE MR10 polycarbonate or equivalent
CNC windshield cut-out made of ¼" thick GE MR10 polycarbonate or equivalent
Includes : 1 x 36" edge guard strip [end user to cut to exact length]
Includes : 3 male clamp parts, 3 female clamp parts
Includes : 6 socket cap screws M6 x 20, 6 locknuts M6 and 6 knobs M6 x 16
Button head
screw
M6 x 18
Hinge
Edge guard strip
WWW.KOLPIN.COM
QTY
1
1
1
1
2
1
Lower windshield
Shoulder
washer
M6
Locknut
M6
Shoulder
washer
M6
Locknut M6
1