Kolpin 2783 Instructions D'installation

READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLATION TO
AVOID INJURY TO YOURSELF, DAMAGE TO THE VEHICLE OR ACCESSORY.
• Torque specifications must be followed when tightening bolts. Over-tightening any and/or all screws will cause
• As specified on carton label, once protective film on shields is removed, product cannot be returned.
• As specified on carton label, damage caused by packaging staples is not covered by warranty. All staples must be
• Failure to follow these installation instructions completely may void any warrantable components and result in
• Do not use Loctite or any other similar fastener adhesive. These types of products react to plastics and cause
• Our windshields are made from the highest quality material providing optimum transparency and clarity.
Blurriness and/or extrusion marks may or may not appear when looking through windshield from a wide, side-
• The application of improper cleaners, abrasive and/or dirty cleaning towels can severely damage the product.
Failure to follow cleaning recommendation (provided herewith) may void any warrantable components.
These instructions contain important information for future reference and must be given to the customer at time of
ITEM PART NAME
A Rear upper windshield
B Rear lower windshield
C Clamp set (1 ¾" dia.)
INSTRUCTION
D Clamp set (1 ¾" dia.)
BAG
E Nuts & bolts
1. Installation
a) Attach clamps (Item C & D) to the roll cage of your vehicle using supplied
hardware (Item E) as shown. The clamps must be installed with the threaded
inserts facing the rear of the vehicle. Do not tighten the clamps to the roll cage
at this stage; you will need to make adjustments later on.
2783 - Instructions YAMAHA YXZ Rear Windshield GP- rev00
IMPORTANT NOTICES
• For proper installation, TWO people are required .
cracks around mounting holes which is not covered by any warranty.
removed prior to removing product from carton.
product damage or personal injury.
cracking. Not covered by any warranty.
angle. This is normal for all extruded clear plastic materials.
purchase or upon completion of installation.
Parts List
(parts available with kit only and not available separately)
Includes: 5 socket cap screws M6 x 20, 12 locknuts M6, 17 button head screws M6 x 18, 17 internal lock washers
M6, 17 domed shoulder washers M6, 7 plastic shoulder washers M6 and 3 round clamp spacers (2" long)
INSTALLATION INSTRUCTIONS
YAMAHA YXZ1000
REAR WINDSHIELD
PART # 2783
DEALER
DESCRIPTION
CNC windshield cut-out made of ⅛" thick GE polycarbonate or equivalent
CNC windshield cut-out made of ⅛" thick GE polycarbonate or equivalent
Includes: 3 male clamp parts and 3 female clamp parts
Includes: 2 male clamp parts and 2 female clamp parts
Locknut M6
Female clamp
part
Male clamp part
Female clamp
part
Locknut M6
www.kolpin.com
QTY
1
1
1
1
1
Socket cap
screws
M6 x 20
Round clamp
spacer
1