Publicité
Les langues disponibles
Les langues disponibles
Product Overview
All touch-points inside the D3 housing are colored
power supply
AC input wiring
junction box
height adjust
tilt lock
rotation lock
Included Components
Modular Emitter (1)
If the supplied Modular Emitter is installed in a protective heatsink for shipping,
remove Emitter from heatsink prior to installation. Discard protective heatsink.
Use care during handling not to touch or dirty the dome lens on the Modular Emitter.
P/N 3662821 Rev A
red.
T10 Torx
Screws (5)
D3 MODULAR EMITTER INSTALLATION GUIDE | 3
Publicité
