Oster BVSTMF2316-033 Notice D'emploi page 5

NOTE: During operation, you can stop operating by pressing
the cold froth button.
5. When the appliance has stopped operating, open the
lid, pour out the frothed milk and enjoy it.
6. Always disconnect the power supply when not use.
II. Heating Milk
1. Place the appliance on a flat surface.
2. Open the lid.
3. Fill the jug with up to 250ml of milk, and replace the lid.
NOTE: the max milk quantity permitted to add is 250ml, to
avoid milk overflowing after heating.
4. Place the jug on the power base and connect the plug
into a power outlet and 3 LED lights will illuminate Red.
5. Press the heat button once, a blue indicator light will
illuminate and then the appliance will start to work.
Once the temperature is reached, the heating element
will stop heating and the mixing paddle will stop rotating
automatically.
Note: During operation, you can stop operating by pressing
the heat button once. Note: The rotation of mixing paddle
is only used for avoiding sticking. It will not froth the milk.
6. When the appliance has stopped operating, open the
lid, pour out the warmed milk and enjoy it.
Caution: Minimum 3 minutes rest time must be maintained
between two continuous cycles, otherwise the appliance
will enter self-protection state automatically after working
for 5 cycles continuously. The indicator will illuminate red
and flash. After 10 minutes, the appliance will switch
to standby state and you can continue operating the
appliance.
8
7. Always disconnect the power supply when not use.
III. Frothing & Heating
1. Place the appliance on a flat surface.
2. Fill the jug with the desired amount of milk, and replace
the lid.
NOTE: the max milk quantity permitted to add is 150ml, to
avoid milk overflowing after mixing or frothing.
3. Place the jug on the power base and connect the plug
into a power outlet. 3 LED lights will illuminate Red.
4. Press the hot froth button once, a blue indicator light
will illuminate. Then the appliance will start to work.
Once the temperature of milk is reached, the heating
element will stop heating and the mixing paddle will
stop rotating automatically.
5. When the appliance has stopped operating, open the
lid, pour out the warmed and frothed milk to enjoy it.
Note: Do Not Remove the lid during the milk frothing
process.
Caution: Minimum 3 minutes rest time must be maintained
between two continuous cycles, otherwise the appliance
will enter self-protection state automatically after working
for 5 cycles continuously. The indicator will illuminate
red and flash. After 10 minutes, the appliance will switch
to standby state and you can continue operating the
appliance.
6. Always disconnect the power supply when not use.
9