Broan GLACIER BCDH1 CANAC Serie Manuel D'installation, D'utilisation Et D'entretien page 16

7 ] For framed cabinet, secure the hood to the EZ1 brackets using four (4) no. 8-18 x 1/2" metal
8 ] For frameless cabinet, secure the hood to the cabinet using four (4) no. 8 x 5/8" round head
9 ] Attach power cable to the hood using the strain relief.
16
screws (included in parts bag). Insert two (2) screws per side, in the slots (as shown in insets
on illustration below).
wood screws (included in parts bag). Insert two (2) screws per side, in the slots (as shown in
inset on illustration below).
M
ETAL
S
CREWS
FRAMED
CABINET
FRAMELESS
CABINET
W
OOD
S
CREWS