Publicité
Les langues disponibles
Les langues disponibles
EN Use
PL Użytkowanie
IMPORTANT: The extraction rate of the hood will vary based upon the total power output selected on the hob, as
shown in the table below.
Each hob cooking zone has a maximum rated output of 10 comprising 1-9 and Boost (10).
Speed Level of the Hood
Speed 2
Speed 4
Speed 5
Speed P - Boost
Note: Speed 1 and Speed 3 on the hood are not available when using this function.
IMPORTANT: Please note that you CANNOT override the current status of the hood from its control panel when you
are in Automatic Control. If you attempt to switch the hood off, the hob will turn the hood back on!
If you wish to manually control the hood again and revert to Independent Control, disable the Auto Extraction Control
icon and switch off the Hood Connection button on the hob.
In both the automatic modes, and if none of the hob cooking zones are active, the hood will automatically enter Timer
Mode after approximately 10 seconds of inactivity and will step down through the power levels one at a time to turn off
the hood after a short period. See the Timer section of the hood manual for more details.
NOTE: Whilst the hob is still switched on the On/Off Icon on the hood will blink, but if the hob is switched off during Timer
Mode, the Timer Icon on the hood will blink instead and step down through the power levels to turn off the hood as before.
02
Changing the lamp colour and brightness of the cooker hood from the hob
1.
Select the Cooker Hood Control Panel from the Main Menu. Touch the Lighting Control Icon
brightness control function.
FR Utilisation
RO Utilizare
Combined Power Output of the Hob
This speed will be selected when the combined power output of all zones is 8 or less.
For example Zone A is on 3 and Zone B is on 4.
This speed will be selected when the combined power output of all zones is between
9 and 24. For example Zone A is on 3, Zone B is on 4 and Zone D is on 6.
This speed will be selected when the combined power output of all zones is between
25 and 32. For example Zone A is on 9, Zone B is on 8, Zone D is 8 and Zone E is 4.
This speed will be selected when the combined power output of all zones is greater
than 32. For example Zone A is on 8, Zone B is on 7, Zone D is on 9, Zone E is on 6 and
Zone F is on 6.
21
to select the
Publicité
