Télécharger Imprimer la page

GoodHome 3663602434337 Mode D'emploi page 16

Masquer les pouces Voir aussi pour 3663602434337:

Publicité

Les langues disponibles

Les langues disponibles

EN Use
PL Użytkowanie
EN
Before you start
WARNING: Read the instructions before using the appliance.
Switch on the appliance at the switched fused connection unit. The appliance is ready for use.
EN
Functions & Settings
01
Control panel
To obtain the best results from your cooker hood it is recommended that you leave it switched on for a short time after
you have finished cooking.
Timer
Fan Boost Function and Speed Increase
Hood On/Off
LED Display
Fan Speed Reduction
Light On/Off
Movement Sensor
To Set Up For First Time Use
Once you have turned on the appliance at the switched fused connection unit, all the icons will start to blink white. The
hood is now in settings mode.
If you do not want to set up the hood at this stage it can be turned off by pressing the Hood On/Off Icon
alternatively, it will switch off automatically after 30 seconds.
IMPORTANT: Once in settings mode, you can adjust the recirculation, lighting or sensor options in any order.
However, all actions must be completed within two minutes.
Setting the Ducted or Recirculation mode
Turn off the power first and within 30 seconds of turning on the mains power again, press the Timer Icon and the Timer
Icon
will turn blue. The LED display will show the current Ducted or Recirculation mode.
Ducted mode
the default setting to extract air to the outside.
Recirculation mode
To change this option press either or to select the correct mode and then press Timer Icon
Setting the Lighting mode
Within 30 seconds of turning on the mains power, press the Light Icon
display will show the current lighting mode.
Ambient light enabled
Ambient light disabled
Cool light
Default setting for all lights.
Warm light
Optional setting for all lights.
To change these settings press or and press the Light Icon
FR Utilisation
RO Utilizare
the setting to recirculate the air with carbon filters installed.
Default setting, all lights are enabled.
Optional, down lights only are enabled.
and the Light Icon will turn blue. The LED
to accept the change.
16
or
to accept the change.

Publicité

loading

Ce manuel est également adapté pour:

Bamia ghagml90