Publicité
Les langues disponibles
Les langues disponibles
WRM60 X
EN
User manual
Unpacking and inspections
Please remember that the packaging (cardboard, cellophane, staples, adhesive tape, straps, etc.) can cut and/or
injure if not handled with care. They should be removed with appropriate means and not left in the hands of
irresponsible persons (e.g. children).
The packaging components must be disposed of in accordance with the regulations in force in the country of
installation.
When opening the packaging, check the integrity of the equipment and check that all components are present.
If defects or deteriorations are found, suspend operations and contact the carrier, and promptly inform the
Western Service.
List of components provided
The following components are supplied in the packaging, which are necessary for the correct installation of the
inverter:
CABLE RJ11 WBUS
CAN cable
length 2.0 m
length 2.5 m
(only on Slave)
(only on Master)
Wall mounting dowels
Wall mounting bracket
and screws
Installation and user
MC4 M/F connectors
manual
(2 pairs)
4
Publicité
