Tribest Solostar 4 SS-4200 Mode D'emploi page 13

DISASSEMBLING AND CLEANING THE SOLOSTAR 4
1. (1) Unlock the Auger Housing Retaining Ring
by turning it counter-clockwise and (2) pull the
Auger Housing to separate from the Main Body.
2. For easier cleaning, take the Auger Housing
to your sink and disassemble the parts under
running water.
3. (1) Separate the Screen Locking Cap and (2)
Nozzle from the Solostar 4 by turning clockwise.
4. Pull to remove the Screen and wash thoroughly
using the included Cleaning Brush.
5. Remove Auger from the Auger Housing.
6. Use lukewarm water with mild detergent to
wash all parts.
1
2
1
2
3
1 2
4
5
6
EN
13