Publicité
Les langues disponibles
Les langues disponibles
EN
MAINTENANCE AND CLEANING
CO2 BOTTLE REPLACEMENT
Having ascertained the need to replace the cylinder indicated by the absence of pressure, proceed
as follows:
1.
Close the main cylinder valve completely and carefully.
2.
Disconnect the connecting pipe.
3.
Remove the reducer after loosening it with a suitable wrench.
4.
Install the new cylinder taking care to tighten the fitting.
5.
Connect the hose again.
6.
Fully open the cylinder main valve.
REPLACEMENT OF THE PURIFIER FILTER CARTRIDGE
Having ascertained the need to replace the filter cartridge, proceed as follows:
1.
Open the purification box by unscrewing the leaflets.
2.
Close the intermediate valve by turning it counterclockwise.
3.
Dispense natural water to completely drain excess water.
4.
Rotate the cartridge clockwise and remove it.
5.
Take out a new purifier filter cartridge.
6.
Insert the new cartridge at the base of the head, matching the flap with the space made in the
ring nut of the head itself.
7.
Engage and vigorously turn the filter counterclockwise.
8.
Open the intermediate valve by turning it clockwise.
9.
Set the digital meter again.
10. Close the purification box by screwing the leaflets on the lid.
11. Open the natural water completely and wait until the outgoing water is perfectly clear (about
15 liters).
CLEANING
For correct cleaning, wash only with soap and water, rinse and dry with a chamois leather and soft
cloth. Absolutely avoid the use of alcohol, solvents, solid or liquid detergents containing corrosive
or acidic substances, cloths with synthetic fibers, abrasive sponges, pads with metal threads, as
they could irreversibly alter the treated surfaces.
THE USE OF THIS TYPE OF DETERGENTS FOR CLEANING THE TAP INVOLVES ANY WARRANTY ON
THE SURFACE OF THE TAP BY IB RUBINETTERIE.
FILTERED WATER IS A KIND OF FOOD AND MUST BE USED WITHIN 1-2 DAYS.
Publicité
