Abus TVIP11561 Mode D'emploi page 29

2
Option 2:
24
All manuals and user guides at all-guides.com
Connecting the network camera to a router/switch
• Connect your PC/laptop to the router/switch.
• Connect the network camera to the router/switch.
• Connect the network camera to the power supply.
• If a DHCP server is available on your network (IP address is
assigned automatically via the router), set the network
interface of your PC/laptop to "Obtain an IP address
automatically".
• If no DHCP server is available, configure the network interface of
your PC/laptop to 192.168.0.2, the default gateway to 192.168.0.1
and the subnet mask to 255.255.255.0.
• Proceed to point 5 to complete the initial set-up and establish
the connection to the network camera.
English