Abus TVIP11561 Mode D'emploi page 28

Network connection
There are three ways to set up the network:
1
Option 1:
English
All manuals and user guides at all-guides.com
Connecting the network camera directly to a
PC/laptop
• Use the network cable supplied to connect the camera and
• Connect the network camera to the power supply. The
• Configure the network interface of your PC/laptop to the IP
• Proceed to point 5 to complete the initial set-up and
PC/laptop to one another.
network camera automatically detects whether a direct
connection between the PC and camera should be
established.
address 192.168.0.2, the default gateway to 192.168.0.1 and
the subnet mask to 255.255.255.0.
establish the connection to the network camera.
23