Sony Trinitron CPD-G520 Mode D'emploi page 16

x x x x EASY mode
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
COLOR and press the control button.
The COLOR menu appears on the screen.
3
Move the control button up or down to highlight
Then press the control button.
The adjustment bar appears.
COLOR
4
Move the control button up or down to fine tune the
color temperature.
The new color temperature setting you fine tuned between
5000K to 11000K is stored in memory.
x x x x PRESET mode
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
COLOR and press the control button.
The COLOR menu appears on the screen.
3
Move the control button up or down to highlight
Then press the control button.
The adjustment bar appears.
COLOR
4
Move the control button up or down to select the
desired temperature.
The preset color temperatures are 5000K, 6500K, and 9300K.
Since the default setting is 9300K, the whites will change
from a bluish hue to a reddish hue as the temperature is
lowered to 6500K and 5000K.
16
: EASY
5 0 0 0 K
X I T :
E
MENU
: PRESET
9 3 0 0 K
6 5 0 0 K
5 0 0 0 K
EX I T :
MENU
x x x x EXPERT mode
You can make additional adjustments to the color in greater detail
by selecting the EXPERT mode.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
COLOR and press the control button.
.
The COLOR menu appears on the screen.
3
Move the control button up or down to adjust the
R (red), G (green), and B (blue) component of input
signal for each of GAIN (6) and BIAS (
press the control button.
If you want to reset the EXPERT adjustments, select
0 (RESET) in COLOR menu. Then select OK in the RESET
window.
x x x x sRGB mode
The sRGB color setting is an industry standard color space
protocol designed to correlate the displayed and printed colors of
sRGB compliant computer products. To adjust the colors to the
sRGB profile, simply select the sRGB mode in the COLOR
MODE ( ) menu of the OPTION (
However, in order to display the sRGB colors correctly (γ = 2.2,
6500K), you must set the PICTURE EFFECT mode to
.
PROFESSIONAL (page 11) and your computer to the sRGB
profile. If you select this mode, you cannot operate the
CONTRAST/BRIGHT menu adjustments.
Note
Your computer and other connected products (such as a printer), must be
sRGB compliant.
: EXPERT
COLOR
R
G
B
R
G
B
45
X I T :
E MENU
). Then
) menu.
: s RGB
COLOR
s RGB
: /
X I T :
E MENU