GE 25865 Mode D'emploi page 15

5. Use the 5 or 6buttons to scroll to LINE 1 or LINE 2 for setting line 1 or line .
6. Press the SELECT soft key to confirm.
7. Use the 5 or 6 buttons to select TONE or PULSE.
. Press the DONE soft key to confirm.
Base - Set Local Area Codes
You can progrom the way the Caller ID records are displayed, for up to five different codes
for your area. For example; if 7 digits is selected, the number will be displayed as xxx-xxxx,
and etc.
1. Make sure your phone is OFF (not in talk mode).
. Press the MENU soft key to go to the main menu.
. Use the 5 or 6 buttons to scroll to LOC AREA CODE .
4. Press the SELECT soft key to confirm.
5. Press the FORMAT soft key to change the length of the CID records.
6. Use the touch-tone pad to enter your -digit area code.
7. Press the DONE soft key to confirm the selection.
Base Ringers
You may program the following items independently for LINE 1 and LINE  under the
RINGER menu; Ringer Volume, Ringer Tone, Phonebook Tone (VIP) and Key Tone. To access
the RINGER Menu:
1. Make sure your phone is OFF (not in talk mode).
. Press the MENU soft key to go to the main menu.
. Use the 5 or 6 buttons to scroll to RINGER.
4. Press the SELECT soft key to confirm.
5. Use the 5 or 6buttons tos to select LINE 1 or LINE 2 for setting line 1 or line .
6. Press the SELECT soft key to confirm.
Base Ringer Volume
From the Ringer Menu:
1. Use the 5 or 6 buttons to scroll to RINGER VOLUME.
. Press the CHANGE soft key to select HIGH, MEDIUM, LOW or OFF.
. Press the DONE soft key to confirm.
NOTE: If you turn the ringer OFF, the ringer off icon shows in the
display.
Get user manuals: See SafeManuals.com
15