Proper Inst Alla Tion And Loca Tion - ALPATEC F 500 FC Mode D'emploi

Notice Fontaines 3/07/06
The water dispenser should be moved by holding it on both sides with both hands, instead of lifting it at
the top with one hand.
Allow at least 1" (2.5cm) of space between the back of the water dispenser and the wall to allow proper
air circulation.
Do not install the water dispenser where the temperature will go below 50°F (10°C) or above 100°F (38°C).
Install the water dispenser on a level floor or counter strong enough to support it when fully loaded. Do
not install where it will be subject to direct sunlight, heat or moisture.
1. Dust cover
2. Top cup
3. Alcula
4. Icy water pushbutton (F500FC and F500FT models) or normal water pushbutton (F500CT model)
5. Drip pan
6. Hot water pushbutton (F500FC and F500CT models) or normal water pushbutton (F500FT model)
7. Drain plug (one on F500CT and F500FT models, two on F500FC)
8. Hot water key safety tab
9. Adaptor for 0,33L to 2L bottles
10. Adaptor for 5L bottles
11/12/13/14. See specific components
Switches
( Black ) ( White )
14
6
8
7.b
15:53 Page 10
PROPER INST ALLA
PROPER INST ALLA
DESCRIPTION
DESCRIPTION
13
TION AND LOCA TION
TION AND LOCA TION
1
2
11
3
12
4
5
7.a
10
9
10