Publicité
Les langues disponibles
Les langues disponibles
To save electricity, the Panel Display turns off
automatically under the following conditions:
When no button has been pressed, when
no doors are open, or when no Dispenser
Lever has been pushed. However, the icon
indicating your selection of cubed or crushed
ice, or water remains active. When you press
a button, open a door, or push a Dispenser
Lever, the Panel Display will turn on again.
Except for the Energy Saver, Water, and
Cubed/Crushed Ice buttons, all function
buttons will become operational after you
remove your finger from the button you are
currently pressing.
( 10 )
If you don't want to make more ice, touch
Ice Maker
the Ice Maker Off button.
Off
The icon will light up and the Ice-Maker
stops making ice.
We recommend you stop ice
making if the following occur:
- There is enough ice in the ice
bucket.
- You want to save water and
energy.
- Water is not being supplied to
the refrigerator.
If the ice maker function is ON, and
the water line is not connected,
there will be a water valve noise
from the back of the unit. If this
occurs, press the Ice Maker Off
(Control Lock(3sec)) button for less
than 3 seconds until the Ice Off
Indicator (
Cooling
Cooling Off mode (also called Shop
Off Mode
mode), is designed for use by retailers
when they are displaying refrigerators on
the shop floor.
In Cooling Off mode, the refrigerator's
fan motor and lights work normally, but
the compressors do not run, and the
refrigerator and freezer do not get cold.
To start Cooling Off mode, touch and hold
the Freezer, Fridge and Alarm buttons for
5 seconds during normal operation.
The refrigerator chime sounds and the
temperature display flashes OFF.
To cancel Cooling Off mode, touch
and hold the Freezer, Fridge and Alarm
buttons again for 5 seconds.
20 English
RF22KR_DA68-02897B-04_EN.indd 20
CHANGING THE WATER
FILTER
WARNING
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG is not legally responsible for any
damage, including, but not limited to,
property damage caused by water
leakage from the use of a generic
water filter. SAMSUNG Refrigerators
are designed to work ONLY WITH
SAMSUNG Water Filters.
The Filter light turns red to let you know when it is
time to change your water filter cartridge.
To give you time to get a new filter, the red light
comes on just before the capacity of the current
filter runs out. Changing the filter on time provides
you with the freshest, cleanest water from your
refrigerator.
To change the water filter, follow these steps:
1. Shut off the water supply. Then, turn the water
) illuminates.
filter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
• Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it
to stick. If you are having difficulties, grip the
water filter firmly and pull it hard.
• When you pull the water filter, a little water
can leak from the opening. This is normal.
To minimize the water leaks, keep the filter
cartridge horizontal when you pull it.
• To prevent overflow, empty the water filter tray
( 3 ) and dry around the filter case ( 2 ).
3. Insert the new filter into the filter case ( 4 ).
To reduce the risk of water damage
to your property DO NOT use generic
brands of water filters in your SAMSUNG
Refrigerator.
• To change the water filter more easily,
shut off the water supply valve.
(Red)
2
1
2018-07-05
12:22:38
Publicité
