Lexmark OptraImage 242 Guide D'installation page 14

Use either form of UAA
(MSB or canonical).
You can find information about installing,
using, and troubleshooting the utility on
the Drivers, MarkVision, and Utilities CD.
14
Method 2: Print server TCP/IP setup utility
Use this simple utility to initialize the IP address if your
computer is running Windows 95/98, Windows NT, or
Windows 2000.
You need to know the 12-digit physical address (UAA) of the
print server to use this method. The UAA is listed on the
network setup page. See "Print a network setup page" on
page 13.
To install the utility:
1
Launch the Drivers, MarkVision, and Utilities CD that
shipped with your OptraImage hardware.
2
Do a custom install to add network support.
3
In the list of installable components, select Print Server
TCP/IP Setup Utility.
4
Follow the instructions on your screen.
OptraImage Setup Guide