Renkforce 34 25 23 Mode D'emploi page 37

All manuals and user guides at all-guides.com
Connecting the plug-in power units
Only the enclosed plug-in power units may be used for the mains
connection.
Only a 230~V/50Hz mains socket for the public supply grid may
be used as the source of power for the plug-in power units. Never
try to operate the appliance on any other voltage.
Make sure in making the connection that the connecting cable is
not pinched or damaged by sharp edges.
• Connect the power supply unit's low-voltage plugs into the power unit jacks
DC12V on the transmitter and the receiver.
• Insert the power supply units into standard household 230 V~/50 Hz mains
sockets.
Adjusting the antennae
Unfold the antennae of the transmitter
and the receiver and turn them in such a
way that the surfaces point towards
each other.
Do not overtwist the antennae, otherwise they may be damaged.
The antennae can be rotated by 360°.
31