Renkforce 34 25 23 Mode D'emploi page 35

All manuals and user guides at all-guides.com
If you want to connect your AV source
device to the S-video output, connect
the S-VIDEO port of the transmitter with
the S-video output of your source device
and the audio outputs with the sockets
AUDIO IN
Receiver
Connect the scart plug of the AV connec-
tion cable marked with „receiver" to the
AV input of your AV source device.
Connect the cinch plug of the AV
connection cable with the sockets
AUDIO OUT and VIDEO OUT of the
receiver.
Only use one type of connection, never
connect the scart port and the S-video
port at the same time with the AV source
device.
The receiver is marked with "Receiver".
Note the colour-labelling on the plugs
and jacks:
Video = yellow
Audio right = red
Audio left = white
29