Publicité
Les langues disponibles
Les langues disponibles
4.
Attach the SES ECU to the topside of the Glove Box
Inner Cover as shown.
• Clean attachment surface using isopropyl alcohol and
cleaning towel.
• To achieve maximum bond strength of Tape, the
attachment surface temperature must be between
68°F-110°F (20°C-43°C) upon application.
• Verify that the SES ECU is firmly attached.
Main Harness Installation
• Use caution when installing the Main Harness. Be
sure to route and attach harness away from sharp
metal surfaces.
1.
Route the Main Harness's 24P Connector toward
the Glove Box area.
2.
Route the Main Harness's 8P and 2P Connectors
toward the J/B area.
- 7 -
Publicité
