Publicité
Les langues disponibles
Les langues disponibles
T
5.
Make sure the bracket is seated on the Stud bolt
and Vehicle bolt correctly.
6.
Secure the Hood Switch to the Vehicle with the
Vehicle Bolt.
• Tighten the Bolt to 33 N·m (3.4kgf·m, 24ft-lb)
7.
Secure the Sub-Harness to the Vehicle Body
using 2 Harness Clamps.
• Clean attachment surface using isopropyl alcohol and
cleaning towel.
8.
Pull out the Vehicle's 2P Pre-Connector which is at
the back of the Battery.
- 13 -
Publicité
