Orbegozo BB 4000 Manuel D'instructions page 8

BB 4000
ELECTRICAL CONNECTION
THIS APPLIANCE MUST BE EARTHED
This appliance is intended or a fixed installation, that is with a permanent electrical connection.
The power cord must have the power consumption.
Material: PVC
NR. 3wires (neutral, live, earth)
2
Section: 0.75 mm (minimum)
Sheath: 10mm (maximum diameter) (minimum)
Once the power cord is inserted through the wall support, attach the support by means of the supplied screws
and dowels which were previously inserted into the wall.
Remove the screw B from the cable in the cable clamp, and place the cable in the provided seat. Make sure
that the wires connections correspond to the stamped symbols on the support.
IMPORTANT
The wires in the mains lead are colored in accordance with the following code.
Green and yellow: Earth
Blue: Neutral
Brown: Live
The green and yellow wire must be connected to the terminal marked with the letter E or the earth symbol.
The blue wire must be connected to the terminal marked with the letter N or colored black.
The brown wire must be connected to the terminal marked with the letter L.
Clamp the wires, to the cable holder by means of the screw B.
Put the cover back into its place on the wall support and fasten it by means of the appropriate screw.
8