Husqvarna EPOS Reference Station Manuel D'utilisation page 58

37.1 LED indicator lamp on the reference station
Light
Green flashing light
Green constant light
Red flashing light
White flashing light
38.1 Storage
If you store the reference station indoors, keep the arm
installed at the post or wall to be able to install the
reference station on its original position again.
If you keep the reference station outdoors during the
winter, we recommend you to keep the power supply
connected.
39.1 Technical data
Dimensions
Length, max length including plate for post installation cm / in.
Width, cm / in.
Height, cm / in.
Weight, reference station kg / lb
Weight, arm kg / lb
Reference station
Type of Power Supply Unit
Power supply input, V AC
Power supply output, V DC
Power supply output, A
Low-voltage cable, length m/ft
IP-code reference station
IP-code power supply unit
Power consumption, W
58 - Troubleshooting
37 Troubleshooting
Status
Startup of the reference station. This can take some minutes.
In operation.
The reference station is not working due to an error. Restart the product. If the prob-
lem stays, speak to your approved servicing dealer.
Firmware update is necessary. Speak to your local Husqvarna representative.
38 Storage and disposal
39 Technical data
38.2 Disposal
Obey the local recycling requirements and applicable
regulations.
36 / 13.8
19 / 7.5
36 / 13.8
0.88 / 1.9
0.33 / 0.73
ADP-40KR, ADP-40FW XX
100-240
28
1.3
20 / 66
IPX5
IP44
2
1512 - 005 -