Schumacher Electric SL194 Manuel D'utilisation page 5

2.6 This product contains a lithium ion battery. In case of fire, you may use water, a
foam extinguisher, Halon, CO
or soda (sodium carbonate) to extinguish the fire. Once the fire is extinguished, douse
the product with water, an aqueous-based extinguishing agent, or other nonalcoholic
liquids to cool the product and prevent the battery from re-igniting. NEVER attempt to
pick up or move a hot, smoking, or burning product, as you may be injured.
3. SET UP INSTRUCTIONS
3.1 Remove any cord wraps and uncoil the charging cable.
4. FEATURES
1
5. CHARGING
IMPORTANT! CHARGE THE HEAD LAMP IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST EVERY 6 MONTHS. Failure to do this will
reduce the battery's capacity and may void the warranty.
5.1 Lift the cover from the micro USB charging port.
5.2 Connect the micro USB end of the charging cable to the micro USB port on the
headlamp. Insert the USB end of the cable into the USB port on your charger.
Plug your charger into a live power source.
5.3 The button will light RED, to indicate charging has begun.
5.4 When the battery is fully charged, the button will change to GREEN.
5.5 Charging will take approximately 6 hours.
, ABC dry chemical, powdered graphite, copper powder
2
2 3 4
• 5 •
1. Adjustable headband
2. Power/Mode/
Charge status button
3. Charging socket
(under cover)
4. Sensors
6
5. USB/Micro USB
5
charging cable
6. CREE
Cree is a registered trademark
®
LED
®
of Cree, Inc.