D-Link DIR-501 Guide D'installation page 5

PRODUCT SET-UP
EASY SETUP WIZARD
PC
Router
Modem
PC
Modem
Router
PC
Modem
Router
D-Link
http://dlinkrouter
ADVANCED SET-UP (ACCESS VIA IP ADDRESS)
To configure DIR-501 manually connect your computer to the DIR-501 using the ethernet cable
provided. Then connect the power cable on the DIR-501. The power light will display as solid green.
Then simply open a browser window and enter the IP address in the browser address field:
DIR-501
Step 1
Position your router close to your modem and the computer that is
already online. Place this router in an open area of your intended
work area for better wireless coverage.
Step 2
Unplug the Ethernet cable from your modem that is connected to
your computer. Plug it into the blue port labled 1 on the back of your
router. The router is now connected to your computer.
Plug one end of the included Ethernet cable that came with your
router into the port labeled INTERNET on the back of the router.
Plug the other end of this cable into the Ethernet port on your
modem.
Step 3
Connect the supplied power adapter into the power port on the back
of the router and then plug into a power outlet or surge protector.
Verify the power light is lit.
Step 4
From the computer you connected to the router, open a web
browser and enter "http://dlinkrouter". Then, press Enter and you
will be directed to the D-Link Setup. Wizard page and follow the on-
screen instructions to configure your D-Link router.
For full product manual, please refer to the website ftp.dlink.eu/
Manuals/DIR-501_Manual.pdf
IP ADDRESS: http://192.168.0.1
USERNAME: admin
PASSWORD:
5