SPECIAL FUNCTIONS
The option buttons also activate special
functions, including LOAD SIZE, SIGNAL ON/OFF,
CHILD LOCK, TUB CLEAN. Press and hold the
option button marked with the special function for
3 seconds to activate.
LOAD SIZE
clothes. The display will indicate the approximate
load size in the LOAD SIZE display. This allows
you to adjust the amount of detergent and other
additives for best results and improved efficiency.
See page 23 for details.
CHILD LOCk
being changed while the washer is operating.
Press and hold the PREWASH button for 3
seconds to activate or deactivate the child lock
function.
The child lock indicator will be shown in the display,
and all buttons are disabled except the ON/OFF
button.
NOTE: CHILD LOCK lasts after the end of cycle.
If you want to deactivate this function, Press and
hold the PREWASH button for 3 seconds.
MFL62526846_en_101116.indd 25
At the beginning of the cycle,
the washer tumbles the load
and detects the weight of the
Use this option to prevent
unwanted use of the washer
or to keep cycle settings from
H O W TO U S E
TUB CLEAN
A buildup of detergent residue
can occur in the wash tub
over time and can lead to a
mildewy or musty smell. The TUB CLEAN cycle is
specially designed to remove this buildup. Press
and hold the EXTRA RINSE button for 3 seconds
to activate this cycle. After the cycle has ended,
open the door and allow the drum interior to dry
completely.
NOTE: Do NOT use this cycle with clothes, and
do NOT add detergent or fabric softener.
NOTE: If you use the TUB CLEAN cycle on a
monthly basis, the wash drum will be kept clean.
SIGNAL ON/OFF
You may turn the end-of-cycle
SIGNAL on or off with the
WATER PLUS button Press
and hold the WATER PLUS button for 3 seconds
to turn the SIGNAL OFF.
Press and hold the WATER PLUS button again for
3 seconds to turn the SIGNAL back on.
25
2010.11.16 10:59:27 AM