Lux Tools A-GS-20/20T Notice Originale page 25

introductory evaluation of the exposure. The vibration emission value may
fluctuate from the specified value during actual use of the power tool. These
fluctuations will depend on the way in which the power tool is used. Try to
keep vibrations to a minimum. One method of reducing the vibration load is,
for example, limiting the length of time you work with the tool. All parts of the
operating cycle must be taken into account for this purpose (for example,
also including times in which the power tool is switched off and times in
which it is switched on, but is running without load). Determination of vibra-
tion emission values in accordance with EN 60335-1, EN 50636-2-94 &
EN 62841-1, EN 62841-4-2.
Accessories
You can find more information about suitable batter-
ies and spare parts of the 1 Power Systems here:
see QR Code
GB
25