Publicité
Les langues disponibles
Les langues disponibles
▶ Use the + / - buttons to select the speed stage.
▶ The indicator for the speed stages is deactivated after 15 seconds.
▶ The speed stage you selected is saved in memory.
Setting with product switched on
▶ Use the + / - buttons to select the speed stage.
▶ The speed stage you select is set and remains saved in memory
when you switch the product off.
6.4 Working with the multitool
WARNING
Risk of injury and damage. Misshapen, dulled or otherwise damaged
accessory tools can break and cause injuries or damage to property.
▶ Do not use worn or damaged accessory tools.
The multitool is designed for a multiplicity of tasks. Depending on the
accessory tool installed, you can use the product to saw, sand/grind or
scrape or to remove grout.
Cutting
Plunge-cut saw blades are ideal for precision cuts in tight spaces, close to
edges or flush with a surface.
▶ Set the multitool to a medium speed stage. This gives you more control
for plunge-cutting.
▶ After making the initial plunge cut, you can select a higher speed stage
for faster progress.
▶ Apply moderate pressure and do not force the accessory tool into the
material. Severe vibrations during the plunge stage of the cutting process
are a sign that you are applying too much pressure.
Grinding
▶ After switching on, allow the product to reach its full oscillation frequency
before you touch the accessory tool against the workpiece.
▶ Lift the product clear of the workpiece before switching off.
▶ When sanding or grinding, use a continuous movement and apply light
pressure. Use the entire sanding/grinding surface, not just the tip.
▶ Rotate the backing pad at regular intervals. This will enable you to
achieve even wear of the abrasive accessory tool and the backing pad.
Scraping
▶ Set the multitool to a low to medium speed stage.
▶ Position the accessory tool at the point where material has to be removed.
▶ Apply moderate pressure. Excessive pressure can result in damage to
the underlying material.
Removing grout
▶ Before starting work measure the width of the grouted joint and select
an appropriate accessory tool.
*2381016*
2381016
English
15
Publicité
