BEFORE THE FIRST USE
·
Make sure all packaging materials and promotional stickers have been removed before using the
appliance for the first time.
·
Before using the device, clean it with a moist cloth.
USE
1.
Place the base on a flat, stable, heat-resistant surface.
2.
Remove the lid.
3.
Place all the ingredients in the soup maker. Add the water or broth last, filling it up to between the
min and max indication lines.
·
1,200 ml for cold preparations
·
1,000 ml for warm preparations
4.
Make sure there is enough liquid so that the starch in the ingredients cannot burn. Take into account
a ratio of 40% vegetables to 60% moisture.
5.
Place the lid on the housing and tighten it into place. Place the filler opening cap in the lid.
6.
Place the pitcher on the base and the plug in the power socket.
7.
Select the required program (juice, jam, extra smooth, soy/nut milk, smooth, chunky, blend/clean)
by pressing the setting button 'MODE'. The indicator lamp for the selected programme will light up.
Then press the On-off button.
8.
You will hear a signal when the programme finishes. You will then see 'end' on the display.
! Be careful when you pour out the soup!
! Do not use the appliance without ingredients.
·
If, during the programme, you want to switch off the appliance or change programmes, press the on/
off button.
·
If, during the smoothie or milkshake programmes, you want to add ingredients, you can do so using
the filler opening. Only use this method for cold preparations. Do not remove the filler opening cap
when blending hot preparations because high temperatures can cause burns.
BLEND
Use the 'blend' button to use the soup maker as a blender. If your preparation does not yet have the
desired texture, use the 'blend' feature to mix it some more. Press and hold the button to make the
appliance mix the ingredients. When you release the button, the blades stop turning. You can use this
feature for up to 1 minute at a time. You must wait at least 30 minutes before starting a second continuous
28
DO726BL