Beko GN163220S Manuel D'utilisation page 21

Using the product
1. Economic use
This sign will light up when the freezer
compartment is set to -18°C', the most
economical setting. (
will turn off when rapid cooling or rapid freezing
function is selected.
2. Power failure/High temperature / error
warning indicator
This indicator ( ) will light up in case of
temperature faults or fault alerts. If you see this
indicator is lit up, please see the "recommended
solutions for problems" section in this guide.
This indicator illuminates during power failure, high
temperature failures and error warnings. During
sustained power failures, the highest temperature
that the freezer compartment reaches will flash on
the digital display. After checking the food located
in the freezer compartment press the alarm off
button to clear the warning.
Please refer to "remedies advised for
troubleshooting" section on your manual if you
observe that this indicator is illuminated.
3. Energy saving function (display off)
If the product doors are kept closed for a long time
energy saving function is automatically activated
and energy saving symbol is illuminated. When
energy saving function is activated, all symbols
on the display other than energy saving symbol
will turn off. When the Energy Saving function is
activated, if any button is pressed or the door is
opened, energy saving function will be cancelled
and the symbols on display will return to normal.
Energy saving function is activated during delivery
from factory and cannot be cancelled.
4. Rapid cooling
When the rapid cooling function is turned on, the
rapid cool indicator will light up (
compartment temperature indicator will display
the value 1. Push the Rapid cool button again to
cancel this function. The Rapid cool indicator will
turn off and return to normal setting. The rapid
cooling function will be automatically cancelled
after 1 hour, unless cancelled by the user. Too
) Economic use indicator
) and the cooler
cool a large amount of fresh food, press the rapid
cool button before placing the food in the cooler
compartment.
5. Vacation function
To activate the Vacation function, , press the quick
fridge button for 3 seconds; this will activate the
vacation mode indicator (
function is active, the cooler compartment
temperature indicator displays the inscription
"- -" and no cooling process will be active in
the cooling compartment. This function is not
suitable to keep food in the cooler compartment.
Other compartments will remain cooled with the
respective temperature set for each compartment.
Push the vacation function button again to cancel
this function.
6. Cooler compartment temperature setting
After pressing the button , the cooler compartment
temperature can be set to 8,7,6,5,4,3,2 and 1
respectively.( )
7. 1 Energy saving (display off)
Pressing this button (
saving sign ( ) and the Energy-saving function
will activate. Activating the energy-saving function
will turn off all other signs on the display. When
the energy-saving function is active, pressing any
button or opening the door will deactivate the
energy-saving function and the display signals will
return to normal. Pressing this button (
will turn off the energy-saving sign and deactivate
the energy-saving function.
7.2 Alarm off
In case of power failure/high temperature alarm,
after checking the food located in the freezer
compartment press the alarm off button to clear
the warning.
8. Keypad lock
Press the display off button, simultaneously for 3
seconds. The keypad lock sign will light up and the
keypad lock will be activated; the buttons will be
inactive when the Keypad lock is activated. Press
the Display off button again simultaneously for 3
seconds. The keypad lock sign will turn off and
20 / 37 EN
). When the Vacation
) will light up the energy-
) again
Refrigerator / User Guide