ADE Denise KE 874 Mode D'emploi page 18

Operation
Operation
Weighing
1. Place the scale on an even, firm and dry surface. Carefully position the scale in order
to avoid hard shocks to the sensors/feet and therefore any damage.
2. Press TARE to switch on the scale.
3. Repeatedly press g/oz to select the desired unit of measurement.
You can choose between "g" (grammes) and "lb.oz" (pound/ounce).
Pay attention to the indication on the display.
4. If you want to weigh an item or substance in a container, now place the container
without anything in it onto the weighing surface. Otherwise, proceed as described
in Section 6.
5. Press TARE. The display will show "0".
6. Put the item or substance to be weighed into the container or place it onto the
weighing surface.
The measured weight is shown on the display.
7. Read off the measured weight and remove the item or substance from the
container or the weighing surface.
Resetting the scale to zero
If the display still shows a minus value (symbol ) even though the weighing surface is
empty (for example, if the scale is not optimally positioned or a TARE value is still
displayed; see next section), you must reset the scale to zero.
− Press
TARE once briefly.
Using the tare function (TARE)
This function is practical when baking, for example, if you would like to add another
ingredient to the ingredients already on the scale.
TARE in order to set the scale back to "0".
1. Press
2. Add the new item or substance.
The weight of the added item or substance is shown on the display.
3. Repeat the process whenever you would like to add more ingredients. The process
can be repeated as often as needed until the capacity limit (5 kg) is reached.
Switching off the scale
− Press and hold down
The scale will automatically switch off if it is not used for approx. 2 minutes.
18
TARE until the indicator on the display goes out.
KE 874 kitchen scale