Publicité
Les langues disponibles
Les langues disponibles
7.
Replace name plate if damaged/peeled, please
order from dealer.
8.
This pump was designed to pump clean or cloudy
water. Pumping muddy or high contaminants
could result in mechanical seal failure.
9.
Priming: this pump is self-priming, however it still
requires the pump body to be filled with water.
Running the pump without filling with water can
result in mechanical seal failure.
10. Hose connections: If the pump fails to pump water
in a short time, the suction hose connection could
be leaking air. Stop the engine and check the
suction hose connection and re-start the engine.
11. Drain water from pump after each use, especially if
the temperature will be at or below freezing. Failure
to do so can result in damage to the pump.
12. Suddenly stopping the discharge of water can
result in Water Hammer, which can break the
pump housing.
6
SAFETY
Priming Plug
Drain Plug
Oil Port
Trash Pump Operator's Manual
Publicité
