EGAmaster 62981 Instructions page 24

- Visit the record clear-all menu
- Press twice to delete the all record data. (
- If press once,
this menu.
- Continuously pressing
screen.
Precaution:
1. Communication function is only supported on some models. Check the model no. and its
specification before using communication function.
2. Do not insert the plug of communication cable into angle meter that does not support
communication function.
- Turn off power and then connect the accessory cable between the COM port of PC and meter.
- Make sure the connection between PC and meter is normal.
- Visit the communication menu ( , shows). Press or to start communication function.( will be
shown)
- Use PC to start the uploader program.
- In uploader program, first select the correct COM port No.
- Next, select the file path to save the uploaded data.
- Finally, press "upload" button to transmit the records to PC.
- The uploaded data is then shown on the column and saved in the *.csv file. Use Microsoft
Excel to view *.csv file.
CAUTIONS:
Refer to the uploader program user guide for the detail operations.
24
CLEAR ALL RECORDS
will be shown. If you want to abandon, just press
will skip out the setup menu and go back to the current target angle
COMMUNICATION
CONNECTING COMMUNICATION CABLE
UPLOADING RECORD DATA
will be shown)
to skip out