Publicité
Les langues disponibles
Les langues disponibles
Note:First the direction sign
. It indicates the meter is under resetting process. Finally if the reset process is completed, the target
angle will be shown. For example
Caution:
During resetting process, never vibrate or shake the meter. Keep it rest.
- The meter will auto power off after about 2 minutes idle for power saving.
Caution:
During communication period (
- Press
for zero reset.
- Usually press
to zero reset the digital angle meter before using the meter. It will guarantee
a better accuracy.
Caution:
1. During resetting process, never vibrate or shake the meter. Keep it rest.
2. If
shows. Refer to "ERROR MESSAGE" section.
- To do hardware rest, use a pin to touch the reset button which is located in the hole of the
meter back.
- Another way is remove battery and re-install it.
- If the meter does not work functionally, please do hardware reset.
or
will show .Then the LCD shows
is shown.
AUTO POWER OFF
appears), the auto power-off function is disabled.
ZERO RESET
HARDWARE RESET
17
Publicité
