EGAmaster 62981 Instructions page 18

LOW VOLTAGE INDICATOR
If the battery voltage is too low, the meter will display a battery symbol and then turn off.
Replace batteries.
If the meter does not reset successfully for a period of time
do zero-reset again. Notice that during resetting process, never vibrate or shake the meter. Keep it
rest.
shows that the meter does not work functionally, please do hardware reset. Refer to
"HARDWARE RESET".
If the meter rotates too fast,
FAST GETTED START
- Press to power on.
- Press or
- Press to start the angle measurement.
- Start rotation.
- Rotation stop and the LCD will be flashing.
- Now press
18
will be shown. Do press
to set target angle.
to record angle or press to clear or press to count from current angle.
ERROR MESSAGE
OPERATION
, will be shown. Press
to zero reset the meter.
to