PURE Advance Manuel D'utilisation page 6

4. Secure the handlebars
Once each handlebar is in the riding position,
check they are securely in place. Do not ride
the scooter if the handlebar is loose.
6. Prepare the scooter
for riding
Lift the scooter out of the cardboard holder
and bring down the central kickstand to stabilise
the scooter. Bring down the footpads.
User Manual | EN
Step 5. Charge the battery
You can charge your e-scooter by plugging
the charging cable into the charging port.
Once fully charged the charger light will
change from red to green.
8. Check the tyre pressure
Using the pump included, check the tyres are
inflated to the optimum pressure of 36 psi. The
correct pressure range can be found on the side
of your e-scooter's tyre.
When you're ready to ride, simply fold up the
central kickstand and scoot off!
5