PURE Advance Manuel D'utilisation page 5

1.2 Setting up your new e-scooter
Your new e-scooter has been thoroughly checked and part-assembled by
our technicians. It's almost ready to ride – just follow these simple set-up
instructions and you'll be ready to go!
Scan the QR code to watch
our scooter set-up video
2. Secure the latch
Lift the latch mechanism until it clips securely
into the stem. Warning! - Do not ride the scooter
if the latch is loose.
4
1. Raise the stem
Remove the protective packaging but do not
lift the scooter out of the cardboard frame
just yet. Lift the stem until it clips upright
into the frame.
3. Unfold the handlebars
Take the right handlebar. Pinch and slide the 2
toggles (one on the front and one on the back) at
the same time to unfold the handlebar.
Raise the handlebar into the riding position.
Repeat the steps for the left handlebar.
Pure Advance