Leckey firefly splashy BIG Mode D'emploi page 13

09.2 Assembling Splashy BIG
• We highly recommend that you
complete a 'dry run' with your
child in Splashy BIG whilst wearing
light clothing to ensure correct
placement of harness and
bumper supports.
• Make sure your bath is clean
and free from any residue before
placing the floorsitter into the bath.
09.2.1 Placement of
the floorsitter
The floorsitter should always be
placed on a firm, solid, static surface.
When placing the floorsitter on your
chosen surface, it's vital that all
rubber feet are in contact with
the surface. Whilst the stabiliser is not
needed when using the Splashy BIG in
the bathtub, it is important to ensure it
is fully rotated to its, "locked", position
when outside the bathtub.
Splashy BIG User Manual p13
• Your Splashy BIG MUST be assembled
BEFORE filling the bath with water.
We recommend you fill the bath with
a mixture of hot and cold water to
prevent damage to Splashy BIG.
• See section 09.6.1 for some guidance
on how to position the recline arm
on the Splashy BIG.
Continued