Publicité
Les langues disponibles
Les langues disponibles
IB-ARNC02-0114-01_Layout 1 12/02/2014 12:09 Page 11
Clean Filter Indicator
This air purifier is equipped with a CLEAN FILTER indicator to let you know when it is time to clean the Nano-
Coil filter, about every 732 hours of use. When the Nano-Coil filter is ready to be cleaned, the CLEAN FILTER
indicator will light up on the control panel.
Once the Nano-Coil filter has been cleaned, press and hold the CLEAN FILTER button until it beeps to reset the
filter indicator.
We recommend replacing your VOC filter, if you choose to use it, when you replace your Nano-Coil filter
(about every 18 months, with regular maintenance).
To purchase a Nano-Coil replacement filter, model # AR-NCFL1-EU, go back to the retailer (where you
purchased your air purifier) or visit www.homedics.co.uk. Replacement VOC filter, model # PP-AR-NC02VOC-
EU, can also be purchased at www.homedics.co.uk.
Cleaning and Maintenance
We recommend that the air purifier be cleaned at least once a month and before storage.
1. Turn the air purifier OFF and unplug it from the outlet.
2. Use a dry cloth to clean the external surfaces of the air purifier.
3. The grill plate may be cleaned with a damp cloth or the brush attachment of your vacuum cleaner.
DO NOT USE WATER, WAX, POLISH, OR ANY CHEMICAL SOLUTION
TROUBLESHOOTING
PROBLEM
The unit won't turn on
No air flow or noticeable
cleaning effect
All manuals and user guides at all-guides.com
POSSIBLE CAUSE
• The unit is not plugged in
• Nano-Coil filter is incorrectly
installed or out of place
• Rear cover is not completely
attached
• The front or rear grill is blocked by
foreign objects
• The plastic bag is still on the
VOC/Odour filter
• The filters are dirty
• The unit has been running for over
2,000 hours
11
SOLUTION
• Plug the unit in
• Properly install the Nano-Coil filter
• Make sure rear grill is completely
engaged
• Remove any obstacles or check the
pre-filter and clean if needed
• Remove the plastic bag
• Clean or replace the Nano-Coil filter
and/ or clean the pre-filter
• Replace the Nano-Coil filter
Publicité
