MV Agusta BRUTALE 800 2012 Manuel D'utilisation page 73

4.4.2. Trip reset
To reset "TRIP 1" and "TRIP 2", proceed as follows.
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral, the
motorbike stationary with your feet on the
ground. The display may not be changed
while driving.
4
Access the "RUN" mode; the total speedometer
("TOTAL") and partial speedometer 1 ("TRIP 1") will
appear on the display.
By pressing the "OK" key for more than three sec-
onds, the "TRIP 1" value will be reset to zero.
All manuals and user guides at all-guides.com
OPERATION
- 72 -
4