Disc
Pads
6
Wear limit 1 mm
All manuals and user guides at all-guides.com
MAINTENANCE
Front brake caliper
6.6.
Checking the wear of the brake pads
Periodically check the width of the friction material layer of the pads,
making sure it never falls below the wear limit ( 1 mm-0.04 inch ).
WAR NING: If the brake pads are excessively worn, the
effectiveness of the braking system decreases, increas-
ing the risk of accidents, personal injury or death. If the
pads have worn to near the wear limit, have both pads
replaced by your MV Agusta dealer. Never replace just
one pad, the pads must always be replaced in pairs.
Ensure that the new pads are su itably broken in, see § 4.2.
- 142 -
Rear brake caliper
6