MV Agusta BRUTALE 800 2012 Manuel D'utilisation page 111

4.8. Checks to be performed before riding
WARNING: A motorcycle can be in good
running order and then become unex-
pectedly unreliable if it was unused for a
short or long period of time. You must
carry out the inspections described in
the table below before each ride. A few
moments taken to carry out these
inspections will help you maintain your
4
motorcycle in optimum working order
and avoid unsafe situations that could
lead to loss of control of the motorcycle,
serious injuries or even death.
Brakes
Check fluid level (§ 6.8).
Check for fluid leakage.
Pull lever and press pedal to check brake operation.
Check pads for wear (§ 6.7.)
Lubricate the lever joint, if necessary.
Gear lever
Press pedal to check gear operation.
Lubricate the lever joint, if necessary.
All manuals and user guides at all-guides.com
OPERATION
Engine start button / stop switch
Check operation (§ 3.4).
Clutch lever
Check fluid level (§ 6.9).
Check for fluid leakage.
Pull lever and check that it moves smoothly and gradually.
Lubricate the lever joint, if necessary.
Throttle twist grip
Check that grip rotates smoothly and returns to closed
position when released.
Steering system
Verify that the operation is smooth and uniform.
Check for play and loosening.
Steering damper
Check adjustment (§ 5.6).
Lights, visual and acoustic signals
Check operation.
Tires
Check inflating pressure and wear (§ 6.10).
Suspensions
Verify that the operation is smooth and uniform.
Check adjustment (§ 5.7 and § 5.8).
Frame fasteners
Check tightening of all screws and nuts.
Tighten them, if necessary.
- 110 -
4