Conceptronic C300APRA2 Guide D'installation Rapide page 40

Les langues disponibles

ENGLISH

6.2 WPS – Pin Code technology

If your WPS enabled wireless client does not have a (virtual) Push Button, you can use the Pin Code

technology to establish a WPS connection.

Note:

To activate the WPS Pin Code feature, you need a computer which is wired connected to the

C300APRA2.

Start your web browser (like: Internet Explorer, FireFox, Safari or Chrome).

Enter the IP address of the device in the address bar of your web browser (by default:

http://192.168.0.1/).

You will first get a login window asking you for a User name and Password. Enter the default User

name and Password ('admin' and 'admin') and click "OK" to enter the web-based configuration.

The login page of the C300APRA2 will be shown.

When the User name and Password are correct the router will display the "Status" page.

Select "Interface Setup" in the top menu and then choose "Wireless".

The wireless configuration page will be shown. Near the bottom of this configuration page, you can find

the "WPS Settings" section:

Select "PIN code" as WPS mode.

Select the WPS Pin Code feature in the software of your wireless client. The wireless client will

generate a Pin Code and show it on your screen.

Enter the PIN code as given by your wireless client in the "enrollee PIN code" and press the

"Start WPS" button.

All manuals and user guides at all-guides.com