Publicité
Les langues disponibles
Les langues disponibles
us_main.book.book Page 30 Tuesday, March 30, 2021 1:55 PM
30 OPERATION
Options and Extra Functions
Control Lock
Use this function to prevent unwanted use of the
appliance or to keep cycle settings from being
changed while the appliance is operating.
1
Touch and hold the Special Care button for 3
seconds to activate or deactivate the control
lock function.
2
appears on the time display, and all
CL
controls are disabled except the Power
button.
NOTE
• The function does not lock the door.
• The function is retained even if there is a power
outage.
• Once set, the function remains active until it is
manually deactivated. The function must be
deactivated to run another cycle.
Delay Start
Use this function to delay the start time of the
cycle.
1
Touch Power button.
2
Choose a cycle and setting.
3
Touch Delay Start button to set the start time
of the cycle.
• The default delay time is 3 hours. Each time
you touch the button, the time increases by
an hour, up to 19 hours.
• Touch and hold the button to increase the
delay time more quickly.
NOTE
• This option cannot be selected when the
appliance is in the Night Care mode.
Night Care
Use this function to store items overnight or
anytime items can't be removed soon after a cycle
ends. The function periodically produces warm air
to prevent condensation, keeping items warm and
dry until they are removed.
1
Place clothes into the appliance.
2
Choose a cycle and setting.
3
Touch and hold Sanitary for 3 seconds to
activate the Night Care function.
4
Touch Start/Pause.
NOTE
• Once set, the function starts after the selected
cycle ends. To cancel the function, touch another
cycle button.
• The function can't be set to follow a Dehumidify
cycle.
• The settings are lost if you touch Power.
• The function runs for a maximum of 24 hours.
• It is safe to open the door at any time during the
function, even when the air is blowing. If the
door is opened during operation, the product
will turn off automatically.
• When the option is set,
[=]
display until the feature is turned off.
• Some noise occurs periodically as warm air is
produced.
Dehumidify
Dehumidifies the room where the appliance is
installed. Room dehumidifying time can be set to 2
or 4 hours by touching the Gentle Dry button.
Notification icon will be displayed with alarm if
drain tank is full. Empty drain tank and touch
Start/Pause button to continue dehumidification.
• The Night Care feature cannot be used while
using Dehumidify setting.
• Use while door is open 45º. If door is closed, the
cycle will not run.
• The rapidity with which the drain tank fills will
depend on the humidity of the environment.
• It is possible for room temperature to increase
due to outgoing airflow from the appliance.
appears on the time
Publicité
