Publicité
Les langues disponibles
Les langues disponibles
us_main.book.book Page 16 Tuesday, March 30, 2021 1:55 PM
16 OPERATION
OPERATION
Operation Overview
Using the Appliance
1
Prepare items.
• Wash clothes first, if needed.
• Exclude heat-sensitive items or items that
can be damaged by exposure to water.
• Place items on hangers or the shelf.
• Fasten buttons and close zippers to keep
items on moving hangers and prevent
damage.
2
Clean the lint filter and change the sheet in
the aroma filter.
• Lift out filter and remove lint from last load
for faster and more efficient performance.
Reinstall filter, checking alignment when
closing grille. Do not operate the appliance
without the lint filter in place. If using a
fabric softener sheet in the aroma filter,
change it after every use.
3
Check the water tanks.
• Fill water supply tank if needed. Empty
water drain tank if needed. Use clean tap
water in the supply tank for better product
performance and lifespan. Do not use
distilled water or reuse water from the drain
tank.
4
Load the appliance.
• Pay attention to fabric care labels and cycle
choice. If clothing is not appropriate for the
cycle selected, it may shrink or be seriously
damaged.
• Remove all empty hangers to avoid noise,
friction, and damage to clothing.
5
Turn on the appliance.
• Touch Power button to turn on the
appliance.
6
Choose a desired cycle.
• Touch a cycle selector button. Press the
button repeatedly to toggle through the
selections.
7
Begin a cycle.
• Touch and hold the Start/Pause button to
begin a cycle. Pause a cycle at any time by
touching Start/Pause again. If you do not
press the Start/Pause button to resume a
cycle within a certain time, the appliance
turns off automatically and all cycle settings
are lost.
• Do not open the door during a cycle. If
steam or hot air escapes, condensation may
collect on the floor or walls, resulting in
damage or mold.
CAUTION
• Do not open the door during operation. There is
a risk of burns or injury from escaping hot air or
steam.
• Do not allow steam or hot air to escape the
cabinet during operation. Opening the door
during operation affects performance,
lengthens styling time, and results in water
condensing and collecting on the floor.
8
End of cycle.
• Remove items when the cycle finishes.
Leave the door open to let hot air escape.
The interior light shuts off after 1.5 minutes
if the door is left open.
Preparing Loads
Checking Fabric Care Labels
Most articles of clothing feature fabric care labels
that include instructions for proper care. Below are
some of the symbols that are relevant to choosing
appropriate items for the appliance.
Symbols on Care Labels
Label
Meaning
Hand Wash
Machine Wash, Normal cycle
Perm press/wrinkle resistant
Gentle/delicate
Check
OK
OK
OK
OK
Publicité
