Télécharger Imprimer la page

Mega MQ 250 Manuel D'instructions page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
 Foodstuffs
 Aggressive media, chemicals
 Corrosive, flammable, explosive
or fuming fluids
 Fluids that are hotter than 35 °C
 Water containing sand and
abrasive fluids
➯ Only on SUB pump
SCOPE OF DELIVERY
Thermal protection
The unit is fitted with a thermal
protection switch which switches the
motor off in the event of overheating.
The pump switches on again
automatically after a cooling down
period of approx. 15 - 20 minutes.
Operate the unit only if the immersion
pump is fully immersed.
SAFETY INSTRUCTIONS
CAUTION!
Risk of injury!
Use the machine and the extension
cable only in perfect working order.
Damaged equipment may not be
operated. Do not disable safety and
protective devices!
 Children, or people who are not
familiar with the operating
instructions, are not allowed to
use the machine.
 Never lift, transport or suspend
the unit using the connection
cable.
 Unilateral modifications or
conversions of the unit are
prohibited.
Electrical safety
CAUTION!
Danger when touching voltage
conducting parts!
Disconnect the plug from the mains if
the extension cable is damaged or
severed! We recommend connecting a
RCD (residual current operated
device) having a nominal residual
current of < 30 mA.
 The house mains voltage must
agree with the details quoted in
the technical data, do not use any
other supply voltage.
 The unit must only be operated
with an electrical installation in
accordance with DIN/VDE 0100,
Part 737, 738 and 702 (swimming
pools). Protection must be
provided by a 10 A line protection
switch and a RCCD (residual
current operated device) having a
nominal residual current of 10/30
mA.
 Use only extension cables that
are suitable for use outdoors -
minimum cross-section 1.5 mm2.
Cable drums should always be
unrolled completely.
 Damaged or brittle extension
cables must not be used.
➯ Check the condition of your
extension cable each time you start
to use the equipment.
ASSEMBLY
Mounting the pressure line
1. Screw the connection elbow into
the pump outlet.
GB 02

Publicité

loading